In addition to my ZFS snapshots I decided to implement a secondary backup system. I decided to land on urbackup for ease of use and, more importantly, it was easier to set up.

Server Install

Assuming a Cent-based system:

cd /etc/yum.repos.d/
sudo wget http://download.opensuse.org/repositories/home:uroni/CentOS_7/home:uroni.repo
sudo yum -y install urbackup-server
sudo systemctl enable urbackup-server
sudo systemctl start urbackup-server

Open up necessary ports for the server:

sudo firewall-cmd --add-port=55413-55415/tcp --permanent
sudo systemctl reload firewalld

By default urbackup listens on port 55414 for connections. You can change this to port 80 and/or 443 for HTTPS by installing nginx and having it proxy the connections for you.

sudo yum -y install nginx
sudo systemctl enable nginx
sudo setsebool -P httpd_can_network_connect 1 #if you're using selinux

Copy the following into /etc/nginx/conf.d/urbackup.conf (make sure to change server_name to suit your needs)

server {
        server_name backup;

        location / {
                proxy_pass http://localhost:55414/;
        }
}

Then start nginx:

sudo systemctl start nginx

You should then be able to access the urbackup console by navigating to the IP / hostname of your backup server in a browser.

Client Install:

Urbackup can use a snapshot system known as dattobd. You should use it if you can in order to get more consistent backups, otherwise urbackup will simply copy files from the host which isn’t always desirable (databases, for example)

Install dattobd (optional):

sudo yum -y update
# reboot if your kernel ends up being updated
sudo yum -y localinstall https://cpkg.datto.com/datto-rpm/repoconfig/datto-el-rpm-release-$(rpm -E %rhel)-latest.noarch.rpm
sudo yum -y install dkms-dattobd dattobd-utils

Install urbackup client:

TF=`mktemp` && wget "https://hndl.urbackup.org/Client/2.1.15/UrBackup%20Client%20Linux%202.1.15.sh" -O $TF && sudo sh $TF; rm $TF
#Select dattobd when prompted if desired

Configure Firewall:

sudo firewall-cmd --add-port=35621-35623/tcp --permanent
sudo systemctl reload firewalld

Once a client is installed, assuming they’re on the same network as the backup server, they will automatically add themselves and begin backing up. If they don’t show up it’s usually a firewall issue.

Restore

Restoration of individual files is easily done through the web console. If you have a windows system, restoring from an image backup is also easy.

Linux hosts

Recovery is trickier if you want to restore a Linux system. Install an empty system of same distribution. Give it the same hostname. Install the client as outlined above, then run:

sudo /usr/local/bin/urbackupclientctl restore-start -b last

Troubleshooting

If for some reason the client not showing up after removing it from the GUI: Uninstall & re-install client software

sudo /usr/local/sbin/uninstall_urbackupclient

TF=`mktemp` && wget "https://hndl.urbackup.org/Client/2.1.15/UrBackup%20Client%20Linux%202.1.15.sh" -O $TF && sudo sh $TF; rm $TF