Tag Archives: tmux

VGA Passthrough with Threadripper

An unfortunate bug exists for the AMD Threadripper family of GPUs which causes VGA Passthrough not to work properly. Fortunately some very clever people have implemented a workaround to allow proper VGA passthrough until a proper Linux Kernel patch can be accepted and implemented. See here for the whole story.

Right now my Thrdearipper 1950x successfully has GPU passthrough thanks to HyenaCheeseHeads “java hack” applet.  I went this route because I really didn’t want to try and recompile my ProxMox kernel to get passthrough to work. Per the description “It is a small program that runs as any user with read/write access to sysfs (this small guide assumes “root”). The program monitors any PCIe device that is connected to VFIO-PCI when the program starts, if the device disconnects due to the issues described in this post then the program tries to re-connect the device by rewriting the bridge configuration.” Instructions taken from the above Reddit post.

  • Go to https://pastebin.com/iYg3Dngs and hit “Download” (the MD5 sum is supposed to be 91914b021b890d778f4055bcc5f41002)
  • Rename the downloaded file to “ZenBridgeBaconRecovery.java” and put it in a new folder somewhere
  • Go to the folder in a terminal and type “javac ZenBridgeBaconRecovery.java”, this should take a short while and then complete with no errors. You may need to install the Java 8 JDK to get the javac command (use your distribution’s software manager)
  • In the same folder type “sudo java ZenBridgeBaconRecovery”
  • Make sure that the PCIe device that you intend to passthru is listed as monitored with a bridge
  • Now start your VM

In my case (Debian Stretch, ProxMox) I needed to install openjdk-8-jdk-headless

sudo apt install openjdk-8-jdk-headless
javac ZenBridgeBaconRecovery.java

Next I have a little script on startup to spawn this as root in a detached tmux session, so I don’t have to remember to run it (If you try to start your VM before running this, it will hose passthrough on your system until you reboot it.) Be sure to change the script to point to wherever you compiled ZenBridgeBaconRecovery

#!/bin/bash
cd /home/nicholas  #change me to suit your needs
sudo java ZenBridgeBaconRecovery

And here is the command I use to run on startup:

tmux new -d '/home/nicholas/passthrough.sh'

Again, be sure to modify the above to point to the path of wherever you saved the above script.

So far this works pretty well for me. I hate having to run a java process as sudo, but it’s better than recompiling my kernel.