Tag Archives: nginx

Backup your systems with urBackup

In addition to my ZFS snapshots I decided to implement a secondary backup system. I decided to land on urbackup for ease of use and, more importantly, it was easier to set up.

Server Install

Assuming a Cent-based system:

cd /etc/yum.repos.d/
sudo wget http://download.opensuse.org/repositories/home:uroni/CentOS_7/home:uroni.repo
sudo yum -y install urbackup-server
sudo systemctl enable urbackup-server
sudo systemctl start urbackup-server

Open up necessary ports for the server:

sudo firewall-cmd --add-port=55413-55415/tcp --permanent
sudo systemctl reload firewalld

By default urbackup listens on port 55414 for connections. You can change this to port 80 and/or 443 for HTTPS by installing nginx and having it proxy the connections for you.

sudo yum -y install nginx
sudo systemctl enable nginx
sudo setsebool -P httpd_can_network_connect 1 #if you're using selinux

Copy the following into /etc/nginx/conf.d/urbackup.conf (make sure to change server_name to suit your needs)

server {
        server_name backup;

        location / {
                proxy_pass http://localhost:55414/;
        }
}

Then start nginx:

sudo systemctl start nginx

You should then be able to access the urbackup console by navigating to the IP / hostname of your backup server in a browser.

Client Install:

Urbackup can use a snapshot system known as dattobd. You should use it if you can in order to get more consistent backups, otherwise urbackup will simply copy files from the host which isn’t always desirable (databases, for example)

Install dattobd (optional):

sudo yum -y update
# reboot if your kernel ends up being updated
sudo yum -y localinstall https://cpkg.datto.com/datto-rpm/repoconfig/datto-el-rpm-release-$(rpm -E %rhel)-latest.noarch.rpm
sudo yum -y install dkms-dattobd dattobd-utils

Install urbackup client:

TF=`mktemp` && wget "https://hndl.urbackup.org/Client/2.1.15/UrBackup%20Client%20Linux%202.1.15.sh" -O $TF && sudo sh $TF; rm $TF
#Select dattobd when prompted if desired

Configure Firewall:

sudo firewall-cmd --add-port=35621-35623/tcp --permanent
sudo systemctl reload firewalld

Once a client is installed, assuming they’re on the same network as the backup server, they will automatically add themselves and begin backing up. If they don’t show up it’s usually a firewall issue.

Restore

Restoration of individual files is easily done through the web console. If you have a windows system, restoring from an image backup is also easy.

Linux hosts

Recovery is trickier if you want to restore a Linux system. Install an empty system of same distribution. Give it the same hostname. Install the client as outlined above, then run:

sudo /usr/local/bin/urbackupclientctl restore-start -b last

Troubleshooting

If for some reason the client not showing up after removing it from the GUI: Uninstall & re-install client software

sudo /usr/local/sbin/uninstall_urbackupclient
TF=`mktemp` && wget "https://hndl.urbackup.org/Client/2.1.15/UrBackup%20Client%20Linux%202.1.15.sh" -O $TF && sudo sh $TF; rm $TF

CentOS7, nginx, reverse proxy, & let’s encrypt

With the loss of trust of Startcom certs I found myself needing a new way to obtain free SSL certificates. Let’s Encrypt is perfect for this. Unfortunately SophosUTM does not support Let’s Encrypt. It became time to replace Sophos as my reverse proxy. Enter nginx.

The majority of the information I used to get this up and running came from digitalocean with help from howtoforge. My solution involves CentOS7, nginx, and the let’s encrypt software.

Install necessary packages

sudo yum install nginx letsencrypt
sudo firewall-cmd --add-service=http --permanent
sudo firewall-cmd --add-service=https --permanent
sudo systemctl enable nginx

Inform selinux to allow nginx to make http network connections:

sudo setsebool -P httpd_can_network_connect 1

Generate certificates

Generate your SSL certificates with the letsencrypt command. This command relies on being able to reach your site over the internet using port 80 and public DNS. Replace arguments below to reflect your setup

sudo letsencrypt certonly -a webroot --webroot-path=/usr/share/nginx/html -d example.com -d www.example.com

The above command places the certs in /etc/letsencrypt/live/<domain_name>

Sophos UTM certificates

In my case I had a few paid SSL certificates I wanted to copy over from Sophos UTM to nginx. In order to do this I had to massage them a little bit as outlined here.

Download p12 from Sophos, also download certificate authority file, then use openssl to convert the p12 to a key bundle nginx will take.

openssl pkcs12 -nokeys -in server-cert-key-bundle.p12 -out server.pem
openssl pkcs12 -nocerts -nodes -in server-cert-key-bundle.p12 -out server.key
cat server.pem Downloaded_CA_file.pem > server-ca-bundle.pem

Once you have your keyfiles you can copy them wherever you like and use them in your site-specific SSL configuration file.

Auto renewal

First make sure that the renew command works successfully:

sudo letsencrypt renew

If the output is a success (a message saying not up for renewal) then add this to a cron job to check monthly for renewal:

sudo crontab -e
30 2 1 * * /usr/bin/letsencrypt renew >> /var/log/le-renew.log
35 2 1 * * /bin/systemctl reload nginx

Configure nginx

Uncomment the https settings block in /etc/nginx/nginx.conf to allow for HTTPS connections.

Generate a strong DH group:

sudo openssl dhparam -out /etc/ssl/certs/dhparam.pem 2048

Create SSL conf snippets in /etc/nginx/conf.d/ssl-<sitename>.conf. Make sure to include the proper location of your SSL certificate files as generated with the letsencrypt command.

ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
ssl_dhparam /etc/ssl/certs/dhparam.pem;

Here is a sample ssl.conf file:

server {
        listen 443;

        ssl_certificate /etc/letsencrypt/live/<HOSTNAME>/fullchain.pem;
        ssl_certificate_key /etc/letsencrypt/live/<HOSTNAME>/privkey.pem;
        ssl_dhparam /etc/ssl/certs/dhparam.pem;

        access_log /var/log/<HOSTNAME.log>;

        server_name <HOSTNAME>;

        location / {
                proxy_set_header Host $host;
                proxy_set_header X-Real-IP $remote_addr;
                proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                proxy_set_header X-Forwarded-Proto $scheme;

                proxy_pass http://<BACKEND_HOSTNAME>/;
        }
}

 

Redirect http to https by creating a redirect configuration file (optional)

sudo vim /etc/nginx/conf.d/redirect.conf
server {
	server_name
		<DOMAIN_1>
                ...
		<DOMAIN_N>;

        location /.well-known {
              alias /usr/share/nginx/html/.well-known;
              allow all;
	}
	location / {
               return 301 https://$host$request_uri; 
	}
}

 

Restart nginx:

sudo systemctl restart nginx

Troubleshooting

HTTPS redirects always go to the host at the top of the list

Solution found here:  use the $host variable instead of the $server_name variable in your configuration.

Websockets HTTP 400 error

Websockets require a bit more massaging in the configuration file as outlined here. Modify your site-specific configuration to add these lines:

# we're in the http context here
map $http_upgrade $connection_upgrade {
  default upgrade;
  ''      close;
}

server {     proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection $connection_upgrade;
}

 

Install wordpress on CentOS7 with nginx & caching

Lately I’ve become interested in the LEMP stack (as opposed to the LAMP stack.) As such I’ve decided to set up a wordpress site running CentOS 7, nginx, mariadb, php-fpm, zend-opcache, apc, and varnish. This writeup will borrow heavily from two of my other writeups, Install Wordpress on CentOS 7 with  SELinux and Speed up WordPress in CentOS7 using caching. This will be a mashup of those two with an nginx twist with guidance from digitalocean. Let’s begin.

Repositories

To install the required addons we will need to have the epel repository enabled:

yum -y install epel-release

nginx

Install necessary packages:

sudo yum -y install nginx
sudo systemctl enable nginx

Optional: symlink /usr/share/nginx/ to /var/www/ (for those of us who are used to apache)

sudo ln -s /usr/share/nginx/ /var/www

Open necessary firewall ports:

sudo firewall-cmd --add-service=http --permanent
sudo systemctl restart firewalld

start nginx:

sudo systemctl start nginx

Navigate to your new site to make sure it brings up the default page properly.

MariaDB

Install:

sudo yum -y install mariadb-server mariadb
sudo systemctl enable mariadb

Run initial mysql configuration to set database root password

sudo systemctl start mariadb
sudo mysql_secure_installation

Configure:

Create a wordpress database and user:

mysql -u root -p 
#enter your mysql root password here
create user wordpress;
create database wordpress;
GRANT ALL PRIVILEGES ON wordpress.* To 'wordpress'@'localhost' IDENTIFIED BY 'password';
quit;

php-fpm

Install:

sudo yum -y install php-fpm php-mysql php-pclzip
sudo systemctl enable php-fpm

Configure:

Uncomment cgi.fix_pathinfo and change value to 0:

sudo sed -i 's/\;\(cgi.fix_pathinfo=\)1/\10/g' /etc/php.ini

Modify the listen= parameter to listen to UNIX socket instead of TCP:

sudo sed -i 's/\(listen =\).*/\1 \/var\/run\/php-fpm\/php-fpm.sock/g' /etc/php-fpm.d/www.conf

Change listen.owner and listen.group to nobody:

sudo sed -i 's/\(listen.owner = \).*/\1nobody/g; s/\(listen.group = \).*/\1nobody/g' /etc/php-fpm.d/www.conf

Change running user & group from apache to nginx:

sudo sed -i 's/\(^user = \).*/\1nginx/g; s/\(^group = \).*/\1nginx/g' /etc/php-fpm.d/www.conf

Start php-fpm:

sudo systemctl start php-fpm

Caching

To speed up wordpress further we need to install a few bits of caching software. Accept defaults when prompted.

zend-opcache & apc:

Install necessary packages:

sudo yum -y install php-pecl-zendopcache php-pecl-apcu php-devel gcc
sudo pecl install apc

Add apc extension to php configuration:

sudo sh -c "echo '\

#Add apc extension 
extension=apc.so' >> /etc/php.ini"

Restart php-fpm:

sudo systemctl restart php-fpm

Varnish

Install:

sudo yum -y install varnish
sudo systemctl enable varnish

Configure nginx to listen on port 8080 instead of port 80:

sudo sed -i /etc/nginx/nginx.conf -e 's/listen.*80/&80 /'

Change varnish to listen on port 80 instead of port 6081:

sudo sed -i /etc/varnish/varnish.params -e 's/\(VARNISH_LISTEN_PORT=\).*/\180/g'

Optional: change varnish to cache files in memory with a limit of 256M (caching to memory is much faster than caching to disk)

sudo sed -i /etc/varnish/varnish.params -e 's/\(VARNISH_STORAGE=\).*/\1\"malloc,256M\"/g'

Add varnish configuration to work with caching wordpress sites:

Update 2/25/2018 added section to allow facebook to properly scrape varnish cached sites.

sudo sh -c 'echo "/* SET THE HOST AND PORT OF WORDPRESS
 * *********************************************************/
vcl 4.0;
import std;

backend default {
 .host = \"127.0.0.1\";
 .port = \"8080\";
 .first_byte_timeout = 60s;
 .connect_timeout = 300s;
}
 
# SET THE ALLOWED IP OF PURGE REQUESTS
# ##########################################################
acl purge {
 \"localhost\";
 \"127.0.0.1\";
}

#THE RECV FUNCTION
# ##########################################################
sub vcl_recv {

#Facebook workaround to allow proper shares
if (req.http.user-agent ~ \"facebookexternalhit\")
        {
        return(pipe);
        }

# set realIP by trimming CloudFlare IP which will be used for various checks
set req.http.X-Actual-IP = regsub(req.http.X-Forwarded-For, \"[, ].*$\", \"\"); 

 # FORWARD THE IP OF THE REQUEST
 if (req.restarts == 0) {
 if (req.http.x-forwarded-for) {
 set req.http.X-Forwarded-For =
 req.http.X-Forwarded-For + \", \" + client.ip;
 } else {
 set req.http.X-Forwarded-For = client.ip;
 }
 }

 # Purge request check sections for hash_always_miss, purge and ban
 # BLOCK IF NOT IP is not in purge acl
 # ##########################################################

 # Enable smart refreshing using hash_always_miss
if (req.http.Cache-Control ~ \"no-cache\") {
 if (client.ip ~ purge) {
 set req.hash_always_miss = true;
 }
}

if (req.method == \"PURGE\") {
 if (!client.ip ~ purge) {
 return(synth(405,\"Not allowed.\"));
 }

 ban (\"req.url ~ \"+req.url);
 return(synth(200,\"Purged.\"));

}

if (req.method == \"BAN\") {
 # Same ACL check as above:
 if (!client.ip ~ purge) {
 return(synth(403, \"Not allowed.\"));
 }
 ban(\"req.http.host == \" + req.http.host +
 \" && req.url == \" + req.url);

 # Throw a synthetic page so the
 # request wont go to the backend.
 return(synth(200, \"Ban added\"));
}

# Unset cloudflare cookies
# Remove has_js and CloudFlare/Google Analytics __* cookies.
 set req.http.Cookie = regsuball(req.http.Cookie, \"(^|;\s*)(_[_a-z]+|has_js)=[^;]*\", \"\");
 # Remove a \";\" prefix, if present.
 set req.http.Cookie = regsub(req.http.Cookie, \"^;\s*\", \"\");

 # For Testing: If you want to test with Varnish passing (not caching) uncomment
 # return( pass );

# DO NOT CACHE RSS FEED
 if (req.url ~ \"/feed(/)?\") {
 return ( pass ); 
}

#Pass wp-cron

if (req.url ~ \"wp-cron\.php.*\") {
 return ( pass );
}

## Do not cache search results, comment these 3 lines if you do want to cache them

if (req.url ~ \"/\?s\=\") {
 return ( pass ); 
}

# CLEAN UP THE ENCODING HEADER.
 # SET TO GZIP, DEFLATE, OR REMOVE ENTIRELY. WITH VARY ACCEPT-ENCODING
 # VARNISH WILL CREATE SEPARATE CACHES FOR EACH
 # DO NOT ACCEPT-ENCODING IMAGES, ZIPPED FILES, AUDIO, ETC.
 # ##########################################################
 if (req.http.Accept-Encoding) {
 if (req.url ~ \"\.(jpg|png|gif|gz|tgz|bz2|tbz|mp3|ogg)$\") {
 # No point in compressing these
 unset req.http.Accept-Encoding;
 } elsif (req.http.Accept-Encoding ~ \"gzip\") {
 set req.http.Accept-Encoding = \"gzip\";
 } elsif (req.http.Accept-Encoding ~ \"deflate\") {
 set req.http.Accept-Encoding = \"deflate\";
 } else {
 # unknown algorithm
 unset req.http.Accept-Encoding;
 }
 }

 # PIPE ALL NON-STANDARD REQUESTS
 # ##########################################################
 if (req.method != \"GET\" &&
 req.method != \"HEAD\" &&
 req.method != \"PUT\" && 
 req.method != \"POST\" &&
 req.method != \"TRACE\" &&
 req.method != \"OPTIONS\" &&
 req.method != \"DELETE\") {
 return (pipe);
 }
 
 # ONLY CACHE GET AND HEAD REQUESTS
 # ##########################################################
 if (req.method != \"GET\" && req.method != \"HEAD\") {
 return (pass);
 }
 
 # OPTIONAL: DO NOT CACHE LOGGED IN USERS (THIS OCCURS IN FETCH TOO, EITHER
 # COMMENT OR UNCOMMENT BOTH
 # ##########################################################
 if ( req.http.cookie ~ \"wordpress_logged_in|resetpass\" ) {
 return( pass );
 }

 #fix CloudFlare Mixed Content with Flexible SSL
 if (req.http.X-Forwarded-Proto) {
 return(hash);
 }

 # IF THE REQUEST IS NOT FOR A PREVIEW, WP-ADMIN OR WP-LOGIN
 # THEN UNSET THE COOKIES
 # ##########################################################
 if (!(req.url ~ \"wp-(login|admin)\") 
 && !(req.url ~ \"&preview=true\" ) 
 ){
 unset req.http.cookie;
 }

 # IF BASIC AUTH IS ON THEN DO NOT CACHE
 # ##########################################################
 if (req.http.Authorization || req.http.Cookie) {
 return (pass);
 }
 
 # IF YOU GET HERE THEN THIS REQUEST SHOULD BE CACHED
 # ##########################################################
 return (hash);
 # This is for phpmyadmin
if (req.http.Host == \"pmadomain.com\") {
return (pass);
}
}

sub vcl_hash {

if (req.http.X-Forwarded-Proto) {
 hash_data(req.http.X-Forwarded-Proto);
 }
}


# HIT FUNCTION
# ##########################################################
sub vcl_hit {
 return (deliver);
}

# MISS FUNCTION
# ##########################################################
sub vcl_miss {
 return (fetch);
}

# FETCH FUNCTION
# ##########################################################
sub vcl_backend_response {
 # I SET THE VARY TO ACCEPT-ENCODING, THIS OVERRIDES W3TC 
 # TENDANCY TO SET VARY USER-AGENT. YOU MAY OR MAY NOT WANT
 # TO DO THIS
 # ##########################################################
 set beresp.http.Vary = \"Accept-Encoding\";

 # IF NOT WP-ADMIN THEN UNSET COOKIES AND SET THE AMOUNT OF 
 # TIME THIS PAGE WILL STAY CACHED (TTL), add other locations or subdomains you do not want to cache here in case they set cookies
 # ##########################################################
 if (!(bereq.url ~ \"wp-(login|admin)\") && !bereq.http.cookie ~ \"wordpress_logged_in|resetpass\" ) {
 unset beresp.http.set-cookie;
 set beresp.ttl = 1w;
 set beresp.grace =3d;
 }

 if (beresp.ttl <= 0s ||
 beresp.http.Set-Cookie ||
 beresp.http.Vary == \"*\") {
 set beresp.ttl = 120 s;
 # set beresp.ttl = 120s;
 set beresp.uncacheable = true;
 return (deliver);
 }

 return (deliver);
}

# DELIVER FUNCTION
# ##########################################################
sub vcl_deliver {
 # IF THIS PAGE IS ALREADY CACHED THEN RETURN A HIT TEXT 
 # IN THE HEADER (GREAT FOR DEBUGGING)
 # ##########################################################
 if (obj.hits > 0) {
 set resp.http.X-Cache = \"HIT\";
 # IF THIS IS A MISS RETURN THAT IN THE HEADER
 # ##########################################################
 } else {
 set resp.http.X-Cache = \"MISS\";
 }
}" > /etc/varnish/default.vcl'

Restart varnish & nginx:

sudo systemctl restart nginx varnish

Logging

By default varnish does not log its traffic. This means that your apache log will only log things varnish does not cache. We have to configure varnish to log traffic so you don’t lose insight into who is visiting your site.

Update 2/14/2017:  I’ve discovered a better way to do this. The old way is still included below, but you really should use this other way.

New way:

CentOS ships with some systemd scripts for you. You can use them out of the box by simply issuing

systemctl start varnishncsa
systemctl enable varnishncsa

If you are behind a reverse proxy then you will want to tweak the varnishncsa output a bit to reflect x-forwarded-for header values (thanks to this github discussion for the guidance.) Accomplish this by appending a modified log output format string to /lib/systemd/system/varnishncsa.service:

sudo sed -i /lib/systemd/system/varnishncsa.service -e "s/ExecStart.*/& -F \'%%{X-Forwarded-For}i %%l %%u %%t \"%%r\" %%s %%b \"%%{Referer}i\" \"%%{User-agent}i\"\' /g"

Lastly, reload systemd configuration, enable, and start the varnishncsa service:

sudo systemctl daemon-reload
sudo systemctl enable varnishncsa
sudo systemctl start varnishncsa

 


Old way:

First, enable rc.local

sudo chmod +x /etc/rc.local
sudo systemctl enable rc-local

Next, add this entry to the rc.local file:

sudo sh -c 'echo "varnishncsa -a -w /var/log/varnish/access.log -D -P /var/run/varnishncsa.pid" >> /etc/rc.local'

If your varnish server is behind a reverse proxy (like a web application firewall) then modify the above code slightly (thanks to this site for the information on how to do so)

sudo sh -c "echo varnishncsa -a -F \'%{X-Forwarded-For}i %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-agent}i\"\' -w /var/log/varnish/access.log -D -P /var/run/varnishncsa.pid >> /etc/rc.local"

Once configuration is in place, start the rc-local service

sudo systemctl start rc-local

WordPress

Download, extract, and set permissions for your wordpress installation (this assumes your wordpress site is the only site on the server)

wget https://wordpress.org/latest.zip
sudo unzip latest.zip -d /usr/share/nginx/html/
sudo chown nginx:nginx -R /usr/share/nginx/html/

Configure nginx

Follow best practice for nginx by creating a new configuration file for your wordpress site. In this example I’ve created a file wordpress.conf inside the /etc/nginx/conf.d directory.

Create the file:

sudo vim /etc/nginx/conf.d/wordpress.conf

Insert the following, making sure to modify the server_name directive:

server {
    listen 8080;
    listen [::]:8080;
    server_name wordpress;
    root /usr/share/nginx/html/wordpress;
    port_in_redirect off;


    location / {
        index index.php;
        try_files $uri $uri/ /index.php?q=$uri&$args;
    }

    location ~ \.php$ {
        fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
        fastcgi_index index.php;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        include fastcgi_params;
    }

    error_page 404 /404.html;     
    location = /40x.html {
     }

    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    }
}

Restart nginx

sudo systemctl restart nginx

Configure upload directory

If you want users to upload content, then you will want to assign the http_sys_rw_content_t selinux security context for the wp-uploads directory (create it if it doesn’t exist)

sudo mkdir /usr/share/nginx/html/wordpress/wp-content/uploads
sudo chown nginx:nginx /usr/share/nginx/html/wordpress/wp-content/uploads
sudo semanage fcontext -a -t httpd_sys_rw_content_t "/usr/share/nginx/html/wordpress/wp-content/uploads(/.*)?"
sudo restorecon -Rv /usr/share/nginx/html/wordpress/wp-content/uploads

Run the wizard

In order for the wizard to run properly we need to temporarily give the wordpress directory httpd_sys_rw_content_t selinux context

sudo chcon -t httpd_sys_rw_content_t /usr/share/nginx/html/wordpress/

Now navigate to your new website in a browser and follow the wizard, which will create a wp-config.php file inside the wordpress directory.

W3 Total Cache

Once your wordpress site is set up you will want to configure it to communicate with varnish. This will make sure the cache is always up to date when changes are made.

Install the W3 Total Cache wordpress plugin and configure it as follows:

opcode-database-object

Opcode cache: Opcode:Zend Opcache

Database cache: Check enable, select Opcode: Alternative PHP Cache (APC / APCu)

Object cache: Check enable, select Opcode: Alternative PHP Cache (APC / APCu)

Fragment cache: Opcode: Alternative PHP cache (APC / APCu)

proxy

Reverse Proxy: Check “Enable reverse proxy caching via varnish”
Specify 127.0.0.1 in the varnish servers box. Click save all settings.

Wrapping up

Once your site is properly set up, restore the original security context for the wordpress directory:

sudo restorecon -v /usr/share/nginx/html/wordpress/

Lastly restart nginx and varnish:

sudo systemctl restart nginx varnish

Success! Everything is working within the proper SELinux contexts and caching configuration.

Troubleshooting

403 forbidden

I received this error after setting everything up. After some digging I came across this site which explained what could be happening.

For me this meant that nginx couldn’t find an index file and was trying to default to a directory listing, which is not allowed by default. This is fixed by inserting a proper directive to find index files, in my case, index.php. Make sure you have “index index.php” in your nginx.conf inside the location / block:

    location / {
        index index.php;
    }

 Accessing wp-admin redirects you to port 8080, times out

If you find going to /wp-admin redirects you to a wrong port and times out, it’s because nginx is forwarding the portnumber. We want to turn that off (thanks to this site for the help.) Add this to your nginx.conf:

  port_in_redirect off;